CO2 Laser cutting machine
1390M7-F CO2 laser engraving and cutting machine adopt split design. Side air system use to prevent fire. Engraving speed is fast. Up to 1200mm/sec. The structure is very strong, which makes it more steady. This machine equipped with a honeycomb and a blade worktable and with a water chiller, makes it possible to install a 100W or even 300W laser tube. The front and back material pass-through door makes it possible to cut long materials.
Features
CO2 lasers have very high conversion efficiency and are widely used in light industry. It is clean, safe and pollution-free.
01
Side air system use to prevent fire
02
Whole machine is equipped with leakage overload protector
03
Independent laser power supply to avoid high voltage interference
04
Filament optical frame, the light path is more stable
Parameters
| Description | JW1390-F |
| Working Area | 1300*900 mm |
| Working Voltage | AC 220V±10%，50HZ |
| Control System | Ruida controller |
| Driver | Leadshine stepper motor, Servo motor |
| Machine table | Blade table, Honeycomb table (Optional) |
| Laser type | Glass Inner Cavity Sealed CO2 Laser Wavelength 10.6μm |
| Energy regulation | Pure circulating water cooling |
| energy regulation | 0-100% stepless control, 0-100% adjustable within the software |
| Minimum Formed Words | ≤±0.05mm |
| Engraving speed | 0 -1200mm/s |
| Cutting speed | 0 - 600mm/s |
| Minimum Formed Words | English word 1mm |
| Working environment | Temperature: 0-45C, Humidity 5-95%(No Condensate Water) |
| Total power | ＜3KW |
| Graphic format supported | BMP, JGP, PNG, DXF, etc. |
Cutting Capacity
| Power | Acrylic | Wood | MDF |
| 80 W | 10mm | 10mm | 5mm |
| 100 W | 15mm | 13mm | 7mm |
| 150 W | 20mm | 18mm | 10mm |
| 180 W | 22mm | 20mm | 12mm |
| 300 W | 30mm | 30mm | 18mm |
Floor Plan
Machine Details
Ruida Controller
01 It can run completely offline, supports U disk to read and write processing files, and can modify file processing attributes; 02 Dynamic display of processing trajectory, coordinate points, progress bar, etc. 03 Panel direct operation automatic focus, support contact and non-contact; 04 Cooperate with the expansion interface of external equipment to facilitate customization requirements.
Lens holder
We use the thin wire optical frame made of pure copper, which is not easy to change light, makes the optical path more stable, can fix the mirror wire, and has the effect of cooling the lens quickly.
X axis
X aixs belt transmission, and we use synchronous gear made of pure copper, which is wear-resistant and corrosion-resistant.
The installation of motors
Our company's motor is installed vertically. There is only one resonance point can reduce the vibration and improve cutting effect.
Side sir system
When you accidentally start a fire while cutting wood or acrylic, the side blow system can prevent fire.
Industry Applications
Acrylic LOGO cutting
3D MDF eagle
Wood mickey mouse
Navigation
Request a Quote
